ProjectExplorer 4 for Autodesk Civil 3D

Installation & Licensing Guide | Floating Network (NLM) License

Back to User Guide ▾
Tutorials ▾
Installation Guide Introduction
Standalone (SLM) License ▾
Floating Network (NLM) License Step 1 - Install ProjectExplorer 4 for Autodesk Civil 3D Step 2 - Install the License Configuration Tool Step 3 - Configure the License Configuration Tool Step 4 - Start ProjectExplorer for the first time Step 5 - Check the License Status
Network License Service ▾
Uninstall Guide

Floating Network (NLM) License

Step 4 - Start ProjectExplorer for the first time

Once the installation and configuration process is complete for both ProjectExplorer 4 for Autodesk Civil 3D and the License Configuration Tool for ProjectExplorer, start Autodesk Civil 3D and navigate to the "Add-ins" tab on the main ribbon.

You should now find a "ProjectExplorer" entry on the ribbon.

Click the new ProjectExplorer icon to start ProjectExplorer, or hit "F1" to open the Quick Start help file. The product can also be started by typing "PROJECTEXPLORER" on the AutoCAD Command Line.

Troubleshooting for Floating Network Licenses

If ProjectExplorer for Autodesk Civil 3D is unable to obtain a license from the Network License Service, refer to the following troubleshooting guide which lists error messages caused by commonly encountered problems.

Error Message Probable Cause and Suggested Action
Communication was successfully established with the license server but no valid licenses for this product were found.

A product license has not been installed or activated on the license server, or an existing product license has expired.

Contact your system administrator for assistance.
There was no endpoint listening at "http:// hostname / CvxNetworkLicensingSvc / LicenseServer /" that could accept the message.

Communication could not be established with the License Server.

Check that the Network License Service is running on the network license server and that there are no errors in the log file.

Check that the communication port specified in the License Configuration Tool matches that of the Network License Service on the license server.

Check that this port is not being blocked by firewall software on either the license client or the license server.
The request channel timed out attempting to send after 00:01:00. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the binding. The time alloted to this operation may have been a portion of a longer timeout.

Communication with the License Server has been lost whilst a license was checked out.

Contact your system administrator for assistance.
Next Step